What are the most commonly traded chemicals and their trading names?
chief_editor@chief_editor
154 Posts
#1 · October 6, 2023, 2:48 pm
Quote from chief_editor on October 6, 2023, 2:48 pm
- A/MMA: Acrylonitrile/Methyl Methacrylate Copolymer
- AA: Acrylic Acid
- AAS: Acrylic Acid Esters - Acrylonitrile-Styrene Copolymer
- ABFN: Azobis(dimethylformamide)
- ABN: Azobisisobutyronitrile
- ABA: Acrylonitrile-Butadiene-Acrylate Copolymer
- ABS: Acrylonitrile-Butadiene-Styrene Copolymer
- AES: Acrylonitrile-Ethylene-Styrene Copolymer
- AMMA: Acrylonitrile/Methyl Methacrylate Copolymer
- ARP: Aromatic Polyester
- AS: Acrylonitrile-Styrene Resin
- ASA: Acrylonitrile-Styrene-Acrylate Copolymer
- BAA: Butyraldehyde Aniline Condensation Product
- BAD: Bisphenol A Diglycidyl Ether
- BCD: β-Cyclodextrin
- BE: Acrylic Latex Exterior Wall Coating
- BFRM: Boron Fiber-Reinforced Plastic
- BLE: Acetone-Diphenylamine High-Temperature Condensation Product
- BMA: Butyl Methacrylate
- BN: Boron Nitride
- BNE: Novel Epoxy Resin
- BNS: β-Naphthalenesulfonic Acid Formaldehyde Low Condensation Product
- BOPP: Biaxially Oriented Polypropylene
- BPMC: 2-tert-Butylphenyl N-Methylaminocarbamate
- BPTP: Polybutylene Terephthalate
- BR: Butadiene Rubber
- BROC: Dibromo(phenyl)methane Epoxy Propyl Ether
- BS: Butadiene-Styrene Copolymer
- BT: Polybutene-1 Thermoplastic Plastic
- BTX: Benzene-Toluene-Xylene Mixture
- CA: Cellulose Acetate
- CAB: Cellulose Acetate Butyrate
- CAP: Cellulose Acetate Propionate
- CE: Cellulose Plastics, General
- CF: Cresol-Formaldehyde Resin, Carbon Fiber
- CMC: Carboxymethyl Cellulose
- CN: Cellulose Nitrate
- CP: Cellulose Propionate
- CPE: Chlorinated Polyethylene
- CPVC: Chlorinated Poly(vinyl chloride)
- CS: Casein
- CTA: Cellulose Triacetate
- CA: Cellulose Acetate
- CAB: Cellulose Acetate Butyrate
- CAN: Cellulose Acetate Nitrate
- CAP: Cellulose Acetate Propionate
- CBA: Chemical Blowing Agent
- CDP: Diphenyl Phosphite
- CF: Carbon Fiber-Reinforced Plastic
- CFE: Chlorotrifluoroethylene
- CFM: Carbon Fiber Packing Material
- CFRP: Carbon Fiber-Reinforced Plastic
- CLF: Chlorinated Fiber
- CMC: Carboxymethyl Cellulose
- CMCNa: Sodium Carboxymethyl Cellulose
- CMD: Darnel Fiber
- CMS: Carboxymethyl Starch
- E/EA: Ethylene/Ethyl Acrylate Copolymer
- E/P: Ethylene/Propylene Copolymer
- E/P/D: Ethylene/Propylene/Diene Terpolymer
- E/TEE: Ethylene/Tetrafluoroethylene Copolymer
- E/VAC: Ethylene/Vinyl Acetate Copolymer
- E/VAL: Ethylene/Vinyl Alcohol Copolymer
- EAA: Ethylene-Acrylic Acid Copolymer
- EBM: Extrusion Blow Molding
- EC: Ethyl Cellulose
- ECB: Ethylene Copolymer and Bitumen Blend
- ECD: Epichlorohydrin Rubber
- ECTEE: Poly(ethylene-trifluorochloroethylene)
- ED-3: Epoxy Resin
- EEA: Ethylene-Ethyl Acrylate Copolymer
- EC: Ethyl Cellulose
- EEA: Ethylene/Ethyl Acrylate Copolymer
- EMA: Ethylene/Methacrylic Acid Copolymer
- EP: Epoxy Resin
- EPD: Ethylene-Propylene-Diene Terpolymer
- EPM: Ethylene-Propylene Copolymer
- EPS: Expanded Polystyrene
- ETFE: Ethylene-Tetrafluoroethylene Copolymer
- EVA: Ethylene/Vinyl Acetate Copolymer
- EVAL: Ethylene-Vinyl Alcohol Copolymer
- EO: Ethylene Oxide
- EOT: Polyethylene Sulfide
- EP: Epoxy Resin
- EPI: Epichlorohydrin Rubber
- EPM: Ethylene-Propylene Copolymer
- EPOR: Ethylene Propylene Diene Monomer Rubber
- EPR: Ethylene-Propylene Rubber
- EPS: Expandable Polystyrene
- EPSAN: Ethylene-Propylene-Styrene-Acrylonitrile Copolymer
- EPT: Ethylene-Propylene-Terpolymer
- EPVC: Emulsion Polyvinyl Chloride
- EU: Polyether-Based Polyurethane
- EVA: Ethylene-Vinyl Acetate Copolymer
- EVE: Ethylene Vinyl Ether
- EXP: Ethylene-Vinyl Acetate-Ethyl Acrylate Terpolymer Emulsion
- F/VAL: Ethylene/Vinyl Alcohol Copolymer
- F-23: Tetrafluoroethylene-Chlorotrifluoroethylene Copolymer
- F-30: Trifluorochloroethylene-Ethylene Copolymer
- F-40: Tetrafluorochloroethylene-Ethylene Copolymer
- FEP: Fluorinated Ethylene Propylene Copolymer
- FNG: Waterproof Silicone Rubber
- FPM: Fluoroelastomer
- FRA: Fiber-Reinforced Acrylate
- FRC: Flame Retardant Adhesive Fiber
- FRP: Fiber-Reinforced Plastic
- FRPA-101: Glass Fiber-Reinforced Polydecamethylene Diamine (Glass Fiber-Reinforced Nylon 1010 Resin)
- FRPA-610: Glass Fiber-Reinforced Polydecamethylene Diamide (Glass Fiber-Reinforced Nylon 610 Resin)
- GF: Glass Fiber
- GFRP: Glass Fiber-Reinforced Plastic
- GFRTP: Glass Fiber-Reinforced Thermoplastic Plastic Promoter
- GOF: Quartz Optical Fiber
- GPS: General-Purpose Polystyrene
- GR-1: Isobutylene Rubber
- GR-N: Nitrile Rubber
- GR-S: Styrene-Butadiene Rubber
- GRTP: Glass Fiber-Reinforced Thermoplastic
- GUV: Ultraviolet-Cured Silicone Rubber Coating
- GY: Anaerobic Adhesive
- HDPE: High-Density Polyethylene
- HIPS: High-Impact Polystyrene
- HLA: Hyaluronic Acid, a Natural Polymer
- HLD: Resin-Modified Chloroprene Rubber
- HM: High Methoxyl Pectin
- HMC: High-Modulus Composite
- HOPP: Homopolypropylene
- HPC: Hydroxypropyl Cellulose
- HPMC: Hydroxypropyl Methylcellulose
- HPMCP: Hydroxypropyl Methylcellulose Phthalate
- HTPS: High Impact Polystyrene
- IEN: Interpenetrating Elastomeric Network
- IHPN: Interpenetrating Hyperbranched Polymer Network
- IIR: Isobutylene-Isoprene Rubber
- IR: Isoprene Rubber
- IVE: Isobutyl Vinyl Ether
- JSF: Polyvinyl Alcohol-Formaldehyde Resin
- KSG: Silica Gel for Separation
- LDN: Chloroprene Rubber Adhesive
- LDPE: Low-Density Polyethylene (LDPE)
- LDR: Chloroprene Rubber
- LHPC: Low-Substituted Hydroxypropyl Cellulose
- LIPN: Latex Interpenetrating Polymer Network
- LJ: Chloroprene Rubber, graft type
- LLDPE: Linear Low-Density Polyethylene (LLDPE)
- LM: Low Methoxyl Pectin
- LMWPE: Low Molecular Weight Polyethylene
- LSR: Carboxylated Chloroprene Latex
- FEP: Perfluoro(ethylene-propylene)
- HDPE: High-Density Polyethylene Plastics
- HIPS: High-Impact Polystyrene
- LCP: Liquid Crystal Polymer
- MDPE: Medium-Density Polyethylene
- MF: Melamine-Formaldehyde Resin
- PA: Polyamide (Nylon)
- PAA: Poly(acrylic acid)
- PADC: Poly(allyl diglycol carbonate) Resin
- PAE: Polyarylether
- PAEK: Polyaryletherketone
- PAI: Polyamide-imide
- PAK: Polyester Alkyd Resin
- PAN: Polyacrylonitrile
- PARA: Polyaryl Amide
- PASU: Polyarylsulfone
- PAT: Polyarylate
- PAUR: Poly(ester urethane)
- PB: Polybutene-1
- PBA: Poly(butyl acrylate)
- PBAN: Polybutadiene-Acrylonitrile
- PBS: Polybutadiene-Styrene
- PBT: Poly(butylene terephthalate)
- PC: Polycarbonate
- PCTFE: Polychlorotrifluoroethylene
- PDAP: Poly(diallyl phthalate)
- PE: Polyethylene
- PEBA: Polyether Block Amide
- PEBA: Thermoplastic Elastomer Polyether
- PEEK: Polyetheretherketone
- PEI: Poly(etherimide)
- PEK: Polyether Ketone
- PEO: Poly(ethylene oxide)
- PES: Poly(ether sulfone)
- PET: Poly(ethylene terephthalate)
- PEUR: Poly(ether urethane)
- PF: Phenol-Formaldehyde Resin
- PFA: Perfluoro(alkoxy alkane) Resin
- PFF: Phenol-Furfural Resin
- PI: Polyimide
- PIB: Polyisobutylene
- PISU: Polyimidesulfone
- PMCA: Poly(methyl-alpha-chloroacrylate)
- PMMA: Poly(methyl methacrylate)
- PMP: Poly(4-methylpentene-1)
- PMS: Poly(alpha-methylstyrene)
- POM: Polyoxymethylene, polyacetal
- PP: Polypropylene
- PPA: Polyphthalamide
- PPE: Poly(phenylene ether)
- PPO: Poly(phenylene oxide) (deprecated)
- PPOX: Poly(propylene oxide)
- PPS: Poly(phenylene sulfide)
- PPSU: Poly(phenylene sulfone)
- PS: Polystyrene
- PSU: Polysulfone
- PTFE: Polytetrafluoroethylene
- PUR: Polyurethane
- PVAC: Poly(vinyl acetate)
- PVAL: Poly(vinyl alcohol)
- PVB: Poly(vinyl butyral)
- PVC: Poly(vinyl chloride)
- PVCA: Poly(vinyl chloride-acetate)
- PVCC: Chlorinated Poly(vinyl chloride) (*CPVC)
- PVI: Poly(vinyl isobutyl ether)
- PVM: Poly(vinyl chloride vinyl methyl ether)
- RF: Resorcinol-formaldehyde resin
- RIM: Reaction Injection Molding
- RP: Reinforced Plastics
- RTP: Reinforced Thermoplastics
- S/AN: Styrene-acrylonitrile copolymer
- SBS: Styrene-butadiene block copolymer
- SI: Silicone
- SMC: Sheet Molding Compound
- S/MS: Styrene-α-methylstyrene copolymer
- TMC: Thick Molding Compound
- TPE: Thermoplastic Elastomer
- TPS: Toughened Polystyrene
- TPU: Thermoplastic Urethanes
- TPX: Polymethylpentene
- VG/E: Vinylchloride-ethylene copolymer
- VC/E/MA: Vinylchloride-ethylene-methylacrylate copolymer
- VC/E/VCA: Vinylchloride-ethylene-vinylacetate copolymer
- PVDC: Poly(vinylidene chloride)
- PVDF: Poly(vinylidene fluoride)
- PVF: Poly(vinyl fluoride)
- PVFM: Poly(vinyl formal)
- PVK: Polyvinylcarbazole
- PVP: Polyvinylpyrrolidone
- S/MA: Styrene-maleic anhydride plastic
- SAN: Styrene-acrylonitrile plastic
- SB: Styrene-butadiene plastic
- Si: Silicone plastics
- SMS: Styrene/alpha-methylstyrene plastic
- SP: Saturated polyester plastic
- SRP: Styrene-rubber plastics
- TEEE: Thermoplastic Elastomer, Ether-Ester
- TEO: Thermoplastic Elastomer, Olefinic
- TES: Thermoplastic Elastomer, Styrenic
- TPEL: Thermoplastic elastomer
- TPES: Thermoplastic polyester
- TPUR: Thermoplastic polyurethane
- TSUR: Thermoset polyurethane
- UF: Urea-formaldehyde resin
- UHMWPE: Ultra-high molecular weight polyethylene
- UP: Unsaturated polyester
- VCE: Vinyl chloride-ethylene resin
- VCEV: Vinyl chloride-ethylene-vinyl copolymer
- VCMA: Vinyl chloride-methyl acrylate copolymer
- VCMMA: Vinyl chloride-methyl methacrylate copolymer
- VCOA: Vinyl chloride-octyl acrylate resin
- VCVAC: Vinyl chloride-vinyl acetate resin
- VCVDC: Vinyl chloride-vinylidene chloride copolymer
- A/MMA: Acrylonitrile/Methyl Methacrylate Copolymer
- AA: Acrylic Acid
- AAS: Acrylic Acid Esters - Acrylonitrile-Styrene Copolymer
- ABFN: Azobis(dimethylformamide)
- ABN: Azobisisobutyronitrile
- ABA: Acrylonitrile-Butadiene-Acrylate Copolymer
- ABS: Acrylonitrile-Butadiene-Styrene Copolymer
- AES: Acrylonitrile-Ethylene-Styrene Copolymer
- AMMA: Acrylonitrile/Methyl Methacrylate Copolymer
- ARP: Aromatic Polyester
- AS: Acrylonitrile-Styrene Resin
- ASA: Acrylonitrile-Styrene-Acrylate Copolymer
- BAA: Butyraldehyde Aniline Condensation Product
- BAD: Bisphenol A Diglycidyl Ether
- BCD: β-Cyclodextrin
- BE: Acrylic Latex Exterior Wall Coating
- BFRM: Boron Fiber-Reinforced Plastic
- BLE: Acetone-Diphenylamine High-Temperature Condensation Product
- BMA: Butyl Methacrylate
- BN: Boron Nitride
- BNE: Novel Epoxy Resin
- BNS: β-Naphthalenesulfonic Acid Formaldehyde Low Condensation Product
- BOPP: Biaxially Oriented Polypropylene
- BPMC: 2-tert-Butylphenyl N-Methylaminocarbamate
- BPTP: Polybutylene Terephthalate
- BR: Butadiene Rubber
- BROC: Dibromo(phenyl)methane Epoxy Propyl Ether
- BS: Butadiene-Styrene Copolymer
- BT: Polybutene-1 Thermoplastic Plastic
- BTX: Benzene-Toluene-Xylene Mixture
- CA: Cellulose Acetate
- CAB: Cellulose Acetate Butyrate
- CAP: Cellulose Acetate Propionate
- CE: Cellulose Plastics, General
- CF: Cresol-Formaldehyde Resin, Carbon Fiber
- CMC: Carboxymethyl Cellulose
- CN: Cellulose Nitrate
- CP: Cellulose Propionate
- CPE: Chlorinated Polyethylene
- CPVC: Chlorinated Poly(vinyl chloride)
- CS: Casein
- CTA: Cellulose Triacetate
- CA: Cellulose Acetate
- CAB: Cellulose Acetate Butyrate
- CAN: Cellulose Acetate Nitrate
- CAP: Cellulose Acetate Propionate
- CBA: Chemical Blowing Agent
- CDP: Diphenyl Phosphite
- CF: Carbon Fiber-Reinforced Plastic
- CFE: Chlorotrifluoroethylene
- CFM: Carbon Fiber Packing Material
- CFRP: Carbon Fiber-Reinforced Plastic
- CLF: Chlorinated Fiber
- CMC: Carboxymethyl Cellulose
- CMCNa: Sodium Carboxymethyl Cellulose
- CMD: Darnel Fiber
- CMS: Carboxymethyl Starch
- E/EA: Ethylene/Ethyl Acrylate Copolymer
- E/P: Ethylene/Propylene Copolymer
- E/P/D: Ethylene/Propylene/Diene Terpolymer
- E/TEE: Ethylene/Tetrafluoroethylene Copolymer
- E/VAC: Ethylene/Vinyl Acetate Copolymer
- E/VAL: Ethylene/Vinyl Alcohol Copolymer
- EAA: Ethylene-Acrylic Acid Copolymer
- EBM: Extrusion Blow Molding
- EC: Ethyl Cellulose
- ECB: Ethylene Copolymer and Bitumen Blend
- ECD: Epichlorohydrin Rubber
- ECTEE: Poly(ethylene-trifluorochloroethylene)
- ED-3: Epoxy Resin
- EEA: Ethylene-Ethyl Acrylate Copolymer
- EC: Ethyl Cellulose
- EEA: Ethylene/Ethyl Acrylate Copolymer
- EMA: Ethylene/Methacrylic Acid Copolymer
- EP: Epoxy Resin
- EPD: Ethylene-Propylene-Diene Terpolymer
- EPM: Ethylene-Propylene Copolymer
- EPS: Expanded Polystyrene
- ETFE: Ethylene-Tetrafluoroethylene Copolymer
- EVA: Ethylene/Vinyl Acetate Copolymer
- EVAL: Ethylene-Vinyl Alcohol Copolymer
- EO: Ethylene Oxide
- EOT: Polyethylene Sulfide
- EP: Epoxy Resin
- EPI: Epichlorohydrin Rubber
- EPM: Ethylene-Propylene Copolymer
- EPOR: Ethylene Propylene Diene Monomer Rubber
- EPR: Ethylene-Propylene Rubber
- EPS: Expandable Polystyrene
- EPSAN: Ethylene-Propylene-Styrene-Acrylonitrile Copolymer
- EPT: Ethylene-Propylene-Terpolymer
- EPVC: Emulsion Polyvinyl Chloride
- EU: Polyether-Based Polyurethane
- EVA: Ethylene-Vinyl Acetate Copolymer
- EVE: Ethylene Vinyl Ether
- EXP: Ethylene-Vinyl Acetate-Ethyl Acrylate Terpolymer Emulsion
- F/VAL: Ethylene/Vinyl Alcohol Copolymer
- F-23: Tetrafluoroethylene-Chlorotrifluoroethylene Copolymer
- F-30: Trifluorochloroethylene-Ethylene Copolymer
- F-40: Tetrafluorochloroethylene-Ethylene Copolymer
- FEP: Fluorinated Ethylene Propylene Copolymer
- FNG: Waterproof Silicone Rubber
- FPM: Fluoroelastomer
- FRA: Fiber-Reinforced Acrylate
- FRC: Flame Retardant Adhesive Fiber
- FRP: Fiber-Reinforced Plastic
- FRPA-101: Glass Fiber-Reinforced Polydecamethylene Diamine (Glass Fiber-Reinforced Nylon 1010 Resin)
- FRPA-610: Glass Fiber-Reinforced Polydecamethylene Diamide (Glass Fiber-Reinforced Nylon 610 Resin)
- GF: Glass Fiber
- GFRP: Glass Fiber-Reinforced Plastic
- GFRTP: Glass Fiber-Reinforced Thermoplastic Plastic Promoter
- GOF: Quartz Optical Fiber
- GPS: General-Purpose Polystyrene
- GR-1: Isobutylene Rubber
- GR-N: Nitrile Rubber
- GR-S: Styrene-Butadiene Rubber
- GRTP: Glass Fiber-Reinforced Thermoplastic
- GUV: Ultraviolet-Cured Silicone Rubber Coating
- GY: Anaerobic Adhesive
- HDPE: High-Density Polyethylene
- HIPS: High-Impact Polystyrene
- HLA: Hyaluronic Acid, a Natural Polymer
- HLD: Resin-Modified Chloroprene Rubber
- HM: High Methoxyl Pectin
- HMC: High-Modulus Composite
- HOPP: Homopolypropylene
- HPC: Hydroxypropyl Cellulose
- HPMC: Hydroxypropyl Methylcellulose
- HPMCP: Hydroxypropyl Methylcellulose Phthalate
- HTPS: High Impact Polystyrene
- IEN: Interpenetrating Elastomeric Network
- IHPN: Interpenetrating Hyperbranched Polymer Network
- IIR: Isobutylene-Isoprene Rubber
- IR: Isoprene Rubber
- IVE: Isobutyl Vinyl Ether
- JSF: Polyvinyl Alcohol-Formaldehyde Resin
- KSG: Silica Gel for Separation
- LDN: Chloroprene Rubber Adhesive
- LDPE: Low-Density Polyethylene (LDPE)
- LDR: Chloroprene Rubber
- LHPC: Low-Substituted Hydroxypropyl Cellulose
- LIPN: Latex Interpenetrating Polymer Network
- LJ: Chloroprene Rubber, graft type
- LLDPE: Linear Low-Density Polyethylene (LLDPE)
- LM: Low Methoxyl Pectin
- LMWPE: Low Molecular Weight Polyethylene
- LSR: Carboxylated Chloroprene Latex
- FEP: Perfluoro(ethylene-propylene)
- HDPE: High-Density Polyethylene Plastics
- HIPS: High-Impact Polystyrene
- LCP: Liquid Crystal Polymer
- MDPE: Medium-Density Polyethylene
- MF: Melamine-Formaldehyde Resin
- PA: Polyamide (Nylon)
- PAA: Poly(acrylic acid)
- PADC: Poly(allyl diglycol carbonate) Resin
- PAE: Polyarylether
- PAEK: Polyaryletherketone
- PAI: Polyamide-imide
- PAK: Polyester Alkyd Resin
- PAN: Polyacrylonitrile
- PARA: Polyaryl Amide
- PASU: Polyarylsulfone
- PAT: Polyarylate
- PAUR: Poly(ester urethane)
- PB: Polybutene-1
- PBA: Poly(butyl acrylate)
- PBAN: Polybutadiene-Acrylonitrile
- PBS: Polybutadiene-Styrene
- PBT: Poly(butylene terephthalate)
- PC: Polycarbonate
- PCTFE: Polychlorotrifluoroethylene
- PDAP: Poly(diallyl phthalate)
- PE: Polyethylene
- PEBA: Polyether Block Amide
- PEBA: Thermoplastic Elastomer Polyether
- PEEK: Polyetheretherketone
- PEI: Poly(etherimide)
- PEK: Polyether Ketone
- PEO: Poly(ethylene oxide)
- PES: Poly(ether sulfone)
- PET: Poly(ethylene terephthalate)
- PEUR: Poly(ether urethane)
- PF: Phenol-Formaldehyde Resin
- PFA: Perfluoro(alkoxy alkane) Resin
- PFF: Phenol-Furfural Resin
- PI: Polyimide
- PIB: Polyisobutylene
- PISU: Polyimidesulfone
- PMCA: Poly(methyl-alpha-chloroacrylate)
- PMMA: Poly(methyl methacrylate)
- PMP: Poly(4-methylpentene-1)
- PMS: Poly(alpha-methylstyrene)
- POM: Polyoxymethylene, polyacetal
- PP: Polypropylene
- PPA: Polyphthalamide
- PPE: Poly(phenylene ether)
- PPO: Poly(phenylene oxide) (deprecated)
- PPOX: Poly(propylene oxide)
- PPS: Poly(phenylene sulfide)
- PPSU: Poly(phenylene sulfone)
- PS: Polystyrene
- PSU: Polysulfone
- PTFE: Polytetrafluoroethylene
- PUR: Polyurethane
- PVAC: Poly(vinyl acetate)
- PVAL: Poly(vinyl alcohol)
- PVB: Poly(vinyl butyral)
- PVC: Poly(vinyl chloride)
- PVCA: Poly(vinyl chloride-acetate)
- PVCC: Chlorinated Poly(vinyl chloride) (*CPVC)
- PVI: Poly(vinyl isobutyl ether)
- PVM: Poly(vinyl chloride vinyl methyl ether)
- RF: Resorcinol-formaldehyde resin
- RIM: Reaction Injection Molding
- RP: Reinforced Plastics
- RTP: Reinforced Thermoplastics
- S/AN: Styrene-acrylonitrile copolymer
- SBS: Styrene-butadiene block copolymer
- SI: Silicone
- SMC: Sheet Molding Compound
- S/MS: Styrene-α-methylstyrene copolymer
- TMC: Thick Molding Compound
- TPE: Thermoplastic Elastomer
- TPS: Toughened Polystyrene
- TPU: Thermoplastic Urethanes
- TPX: Polymethylpentene
- VG/E: Vinylchloride-ethylene copolymer
- VC/E/MA: Vinylchloride-ethylene-methylacrylate copolymer
- VC/E/VCA: Vinylchloride-ethylene-vinylacetate copolymer
- PVDC: Poly(vinylidene chloride)
- PVDF: Poly(vinylidene fluoride)
- PVF: Poly(vinyl fluoride)
- PVFM: Poly(vinyl formal)
- PVK: Polyvinylcarbazole
- PVP: Polyvinylpyrrolidone
- S/MA: Styrene-maleic anhydride plastic
- SAN: Styrene-acrylonitrile plastic
- SB: Styrene-butadiene plastic
- Si: Silicone plastics
- SMS: Styrene/alpha-methylstyrene plastic
- SP: Saturated polyester plastic
- SRP: Styrene-rubber plastics
- TEEE: Thermoplastic Elastomer, Ether-Ester
- TEO: Thermoplastic Elastomer, Olefinic
- TES: Thermoplastic Elastomer, Styrenic
- TPEL: Thermoplastic elastomer
- TPES: Thermoplastic polyester
- TPUR: Thermoplastic polyurethane
- TSUR: Thermoset polyurethane
- UF: Urea-formaldehyde resin
- UHMWPE: Ultra-high molecular weight polyethylene
- UP: Unsaturated polyester
- VCE: Vinyl chloride-ethylene resin
- VCEV: Vinyl chloride-ethylene-vinyl copolymer
- VCMA: Vinyl chloride-methyl acrylate copolymer
- VCMMA: Vinyl chloride-methyl methacrylate copolymer
- VCOA: Vinyl chloride-octyl acrylate resin
- VCVAC: Vinyl chloride-vinyl acetate resin
- VCVDC: Vinyl chloride-vinylidene chloride copolymer
Click for thumbs down.0Click for thumbs up.0
Last edited on October 6, 2023, 2:49 pm by chief_editor